| R134a | R513a refrigerant | ||
|---|---|---|
| Compressor | Oil | Mounting |
| UX330 | PAG56 or POE68 (600 ml) | Direct (all sides) |
| R404a | R452a refrigerant | ||
|---|---|---|
| Compressor | Oil | Mounting |
| UXF330 | POE32 (600 ml) | Direct (all sides) |
| R1234yf refrigerant | ||
|---|---|---|
| Compressor | Oil | Mounting |
| UXY330 | PAG46 HD (180ml) | Direct (all sides) |
Suited to all mounting brackets made for direct mount (boltthrough) compressors with bolt holes 104 mm apart, including four M10 x 1.5 mm threaded holes top and bottom 75 mm apart.
A low-side service valve is fitted to the rear cap, including a high-pressure relief valve.
An oil return fitting – 7/16-20 UNF male flare (Part No. 42203-000160) – is fitted on top of the compressor. It has a unique flow design suited to the Unicla oil separator (Part No. OS000030) and is interchangeable with the low-side service valve.
Consistent M12 x 1.0 mm access port size. Easy interchange of blanking plugs, service valves, oil return and pressure switch fittings.
Porting for horizontal or vertical hose connections are standard, achieved by heavy duty blanking plates installed on outlets that are not in use. A range of standard hose port manifolds is available.
| Type | 158 | 168 | 178 | 210 | 12V | 24V | HDC |
|---|---|---|---|---|---|---|---|
| AA-Groove | |||||||
| B-Groove | |||||||
| BB-Groove | |||||||
| 6-Groove | |||||||
| 8-Groove | |||||||
| 10-Groove |
Pulley measurements are in millimetres
